Tadej Pogačar’s $350k Richard Mille watch placement is the ultimate Paris-Roubaix marginal gain

[analyse_image type=”featured” src=”https://cdn.mos.cms.futurecdn.net/6jE538cskw7ck9sHf2xDnH-2400-80.png”]

Tadej Pogačar’s $350k Richard Mille watch placement is the ultimate Paris-Roubaix marginal gain

A close up of Tadej Pogacar's watch position on his wrist as he rides over the cobblestones

(Image credit: Getty Images)

Pro cycling and high-end watches have been intertwined for decades. Tissot is the official timekeeper for the Tour de France, Tudor sponsors a whole team, and then there’s Festina and Tag Heuer. Richard Mille is a very high-end brand in the world of watches and sponsors UAE Team Emirates, as well as Tadej Pogačar personally and other riders like Mathieu van der Poel, and formerly, Mark Cavendish, too.

At the Tour de France last year, we spotted Pogačar and Van der Poel wearing $350,000 Richard Mille RM 67-02 models; sports specific automatic watches (meaning they rely on the movement of the wearer for power rather than a battery) with elastic straps. There were no issues at the Tour for the pair, besides perhaps some worry about the cost of crashing wrist-first on any given stage, but things were very different at Paris-Roubaix.

At the Queen of the Classics last year, the brutal cobbles caused the crown of Pogačar’s watch to cut into his wrist to such a degree that it caused significant bleeding, clearly shown on the white of his world champion’s gloves.

Article continues below

A post shared by TNT Sports Cycling (@tntsportscycling)

A photo posted by on

This year, a year on from his impressive second-place debut, the Slovenian appears to still be planning to race with the watch on, but it seems he’s learned from his prior misfortune. In Thursday’s recon rides, he was seen wearing the watch much higher up on his wrist, buffered to some degree by the long wrists of aero gloves.

This new watch placement is the tip of the iceberg in what has been a total overhaul of Pogačar’s cobble setup to try and take the last Monument victory still missing from his shining palmares. In swapping from the V5Rs to the aero Y1Rs means he’s no longer able to use the top section of the bars, as the cockpit of the Y1Rs only really allows the use of the hoods or the drops, which may mean his wrists are more in line with his hands and less likely to cause a repeat issue. An easier workaround may have been to wear the face on the inside of the wrist, but that may cause angst from the sponsors.

In addition to the new machine he will almost certainly be using the same foam hack under the brake levers we saw last year to keep his fingers from getting abraded, as wide a set of tyres as will fit in the frame, and the standard Y1Rs computer mount that would allow the computer to pivot downwards under extreme force rather than snapping off, as presumably would be the worry with his usual 3D printed aero shroud-mount.

Get unlimited access to our unrivalled 2026 Spring Classics coverage with a Cyclingnews subscription. We’ll bring you breaking news, reports, and analysis from some of the biggest races on the calendar, including Milan-San Remo, Paris-Roubaix and the Tour of Flanders. Find out more.

TOPICS
Will Jones
Will Jones
Senior Tech Writer

Will joined the Cyclingnews team as a reviews writer in 2022, having previously written for Cyclist, BikeRadar and Advntr. He’s tried his hand at most cycling disciplines, from the standard mix of road, gravel, and mountain bike, to the more unusual like bike polo and tracklocross. He’s made his own bike frames, covered tech news from the biggest races on the planet, and published countless premium galleries thanks to his excellent photographic eye. Also, given he doesn’t ever ride indoors he’s become a real expert on foul-weather riding gear. His collection of bikes is a real smorgasbord, with everything from vintage-style steel tourers through to superlight flat bar hill climb machines.

You must confirm your public display name before commenting

Please logout and then login again, you will then be prompted to enter your display name.

Tadej Pogačar’s $350k Richard Mille watch placement is the ultimate Paris-Roubaix marginal gain

A close up of Tadej Pogacar's watch position on his wrist as he rides over the cobblestones

(Image credit: Getty Images)

Pro cycling and high-end watches have been intertwined for decades. Tissot is the official timekeeper for the Tour de France, Tudor sponsors a whole team, and then there’s Festina and Tag Heuer. Richard Mille is a very high-end brand in the world of watches and sponsors UAE Team Emirates, as well as Tadej Pogačar personally and other riders like Mathieu van der Poel, and formerly, Mark Cavendish, too.

At the Tour de France last year, we spotted Pogačar and Van der Poel wearing $350,000 Richard Mille RM 67-02 models; sports specific automatic watches (meaning they rely on the movement of the wearer for power rather than a battery) with elastic straps. There were no issues at the Tour for the pair, besides perhaps some worry about the cost of crashing wrist-first on any given stage, but things were very different at Paris-Roubaix.

At the Queen of the Classics last year, the brutal cobbles caused the crown of Pogačar’s watch to cut into his wrist to such a degree that it caused significant bleeding, clearly shown on the white of his world champion’s gloves.

Article continues below

A post shared by TNT Sports Cycling (@tntsportscycling)

A photo posted by on

This year, a year on from his impressive second-place debut, the Slovenian appears to still be planning to race with the watch on, but it seems he’s learned from his prior misfortune. In Thursday’s recon rides, he was seen wearing the watch much higher up on his wrist, buffered to some degree by the long wrists of aero gloves.

This new watch placement is the tip of the iceberg in what has been a total overhaul of Pogačar’s cobble setup to try and take the last Monument victory still missing from his shining palmares. In swapping from the V5Rs to the aero Y1Rs means he’s no longer able to use the top section of the bars, as the cockpit of the Y1Rs only really allows the use of the hoods or the drops, which may mean his wrists are more in line with his hands and less likely to cause a repeat issue. An easier workaround may have been to wear the face on the inside of the wrist, but that may cause angst from the sponsors.

In addition to the new machine he will almost certainly be using the same foam hack under the brake levers we saw last year to keep his fingers from getting abraded, as wide a set of tyres as will fit in the frame, and the standard Y1Rs computer mount that would allow the computer to pivot downwards under extreme force rather than snapping off, as presumably would be the worry with his usual 3D printed aero shroud-mount.

Get unlimited access to our unrivalled 2026 Spring Classics coverage with a Cyclingnews subscription. We’ll bring you breaking news, reports, and analysis from some of the biggest races on the calendar, including Milan-San Remo, Paris-Roubaix and the Tour of Flanders. Find out more.

TOPICS
Will Jones
Will Jones
Senior Tech Writer

Will joined the Cyclingnews team as a reviews writer in 2022, having previously written for Cyclist, BikeRadar and Advntr. He’s tried his hand at most cycling disciplines, from the standard mix of road, gravel, and mountain bike, to the more unusual like bike polo and tracklocross. He’s made his own bike frames, covered tech news from the biggest races on the planet, and published countless premium galleries thanks to his excellent photographic eye. Also, given he doesn’t ever ride indoors he’s become a real expert on foul-weather riding gear. His collection of bikes is a real smorgasbord, with everything from vintage-style steel tourers through to superlight flat bar hill climb machines.

You must confirm your public display name before commenting

Please logout and then login again, you will then be prompted to enter your display name.

Tadej Pogačar’s $350k Richard Mille watch placement is the ultimate Paris-Roubaix marginal gain

Pro cycling and high-end watches have been intertwined for decades. Tissot is the official timekeeper for the Tour de France, Tudor sponsors a whole team, and then there’s Festina and Tag Heuer. Richard Mille is a very high-end brand in the world of watches and sponsors UAE Team Emirates, as well as Tadej Pogačar personally and other riders like Mathieu van der Poel, and formerly, Mark Cavendish, too.

At the Tour de France last year, we spotted Pogačar and Van der Poel wearing $350,000 Richard Mille RM 67-02 models; sports specific automatic watches (meaning they rely on the movement of the wearer for power rather than a battery) with elastic straps. There were no issues at the Tour for the pair, besides perhaps some worry about the cost of crashing wrist-first on any given stage, but things were very different at Paris-Roubaix.

At the Queen of the Classics last year, the brutal cobbles caused the crown of Pogačar’s watch to cut into his wrist to such a degree that it caused significant bleeding, clearly shown on the white of his world champion’s gloves.

Article continues below

A post shared by TNT Sports Cycling (@tntsportscycling)

A photo posted by on

This year, a year on from his impressive second-place debut, the Slovenian appears to still be planning to race with the watch on, but it seems he’s learned from his prior misfortune. In Thursday’s recon rides, he was seen wearing the watch much higher up on his wrist, buffered to some degree by the long wrists of aero gloves.

This new watch placement is the tip of the iceberg in what has been a total overhaul of Pogačar’s cobble setup to try and take the last Monument victory still missing from his shining palmares. In swapping from the V5Rs to the aero Y1Rs means he’s no longer able to use the top section of the bars, as the cockpit of the Y1Rs only really allows the use of the hoods or the drops, which may mean his wrists are more in line with his hands and less likely to cause a repeat issue. An easier workaround may have been to wear the face on the inside of the wrist, but that may cause angst from the sponsors.

In addition to the new machine he will almost certainly be using the same foam hack under the brake levers we saw last year to keep his fingers from getting abraded, as wide a set of tyres as will fit in the frame, and the standard Y1Rs computer mount that would allow the computer to pivot downwards under extreme force rather than snapping off, as presumably would be the worry with his usual 3D printed aero shroud-mount.

Get unlimited access to our unrivalled 2026 Spring Classics coverage with a Cyclingnews subscription. We’ll bring you breaking news, reports, and analysis from some of the biggest races on the calendar, including Milan-San Remo, Paris-Roubaix and the Tour of Flanders. Find out more.

[analyse_source url=”https://www.cyclingnews.com/pro-cycling/tadej-pogacars-usd350k-richard-mille-watch-placement-is-the-ultimate-paris-roubaix-marginal-gain/”]


Analyse


Post not analysed yet. Do the magic.