{"id":1878827,"date":"2026-04-12T11:30:02","date_gmt":"2026-04-12T08:30:02","guid":{"rendered":"https:\/\/analyse.optim.biz\/?p=1878827"},"modified":"2026-04-12T11:30:02","modified_gmt":"2026-04-12T08:30:02","slug":"ankers-eufymake-e1-finally-brings-printers-out-of-the-dark-ages","status":"publish","type":"post","link":"https:\/\/analyse.optim.biz\/?p=1878827","title":{"rendered":"Anker\u2019s EufyMake E1 Finally Brings Printers Out of the Dark Ages"},"content":{"rendered":"

[analyse_image type=”featured” src=”https:\/\/gizmodo.com\/app\/uploads\/2026\/04\/Anker-eufyMake-E1-UV-Printer-review-26-1200×675.jpg”]<\/p>\n

\n
\n

Years ago, long before I joined this outfit, Gizmodo cemented a policy against reviewing printers. The reasons why are obvious. There are so few printers that can claim any features that beat the competition. Not to mention the travesty of proprietary printer ink and software locks that make printing an expensive nightmare. So there\u2019s a reason to pay attention when I say I was utterly obsessed with Anker\u2019s EufyMake E1 UV printer and its ability to print on practically anything and everything.<\/p>\n

Anker\u2019s new printer isn\u2019t like any other. It uses a special kind of ink that cures near-instantly with a blast of ultraviolet light. This means that it\u2019s not designed to drop ink on a good ol\u2019 8.5 x 11-inch loose leaf. It instead prints on practically everything else. It can stencil on canvas, wood, plastic, metal, ceramics, and more. It\u2019s not just flat objects, the UV printer can print on stuff like a cylindrical water bottle. Ironically, when we tried printing on paper, we got some of our worst results from the EufyMake E1.<\/p>\n

\n
\n
\n
3.5<\/span><\/div>\n<\/div>\n

Anker EufyMake E1 UV Printer<\/p>\n

The Anker EufyMake E1 fufills its promise of printing on whatever you want, even if it will take a long time to do any of it.<\/p>\n

\n
\n
\n
\n

Pros<\/p>\n<\/div>\n

    \n
  • Offers beautiful print quality <\/li>\n
  • Can create a faux-3D embossed effect <\/li>\n
  • Prints on flat surfaces and mugs <\/li>\n
  • PC\/Mac software is easy to use <\/li>\n<\/ul>\n<\/div>\n
    \n
    \n

    Cons<\/p>\n<\/div>\n

      \n
    • Lining up prints can be finicky <\/li>\n
    • Setup and printing takes time <\/li>\n
    • Exorbitant price for extra components <\/li>\n<\/ul>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
      \n

      And still, there seems to be a holy mandate, perhaps one of Moses\u2019 apocryphal \u201c15 commandments,\u201d that says no printer shall be without annoyances. There are no on-device menus or buttons. EufyMake\u2019s Mac and PC-based Studio software is clean and usable, though automatic object detection can result in a possible missprint.<\/p>\n

      The UV printer demands time. It\u2019s not fast enough; you can crank out dozens of customized water bottles like some industrial Etsy maker. To make the most out of this machine, you have to first understand the UV printer\u2019s quirks, of which there are many. What I can say for certain is all the images I printed out for friends and colleagues turned out bright, vibrant, and beautiful\u2014or at least, most of them did.<\/p>\n

      \"Anker
      You can really print on anything, from wood, to canvas, to plastic. Just don\u2019t try regular paper. \u00a9 Raymond Wong \/ Gizmodo<\/figcaption><\/figure>\n

      Price will be your biggest hurdle. The EufyMake E1 was originally a Kickstarter project that ran through 2025. Anker claimed it had shipped out the initial units to all backers. Now, the base UV printer bundle is up for preorder for $2,300 with an expected launch date on May 6. The EufyMake E1 is made for small businesses who expect to become a small-scale DIY studio. Otherwise, you\u2019ll need deep pockets if you hope to become the absolute king of gift giving.<\/p>\n

      Costs an arm and a leg, even for extra ink<\/h2>\n
      \"Anker
      Setup involves unboxing each separate ink cartridge. \u00a9 Raymond Wong \/ Gizmodo<\/figcaption><\/figure>\n

      The $2,300 basic bundle comes with the necessary ink cartridges, the mini flatbed, and the larger standard flatbed to print on. If you want other accoutrements, like the rotary attachment to print on mugs and a UV DTF laminating machine, that\u2019s an additional $400 for each. For review, Anker generously provided Gizmodo with the entire lineup of accessories and many, many objects to print on. That includes the $2,900 \u201cDeluxe\u201d bundle with all the extra attachments.<\/p>\n

      In addition, Anker\u2019s EufyMake brand will try to upsell you bundle after bundle of blank ceramic coasters, mugs, metal sheets, canvases, and many other objects to print on. You don\u2019t have to get everything you want from Anker itself. I went out to my local art supplies store and bought a few dozen flat canvas hardboards for less than $10, and they accepted these prints just as nicely as Anker\u2019s $300 \u201cBasic Bundle Materials Kit.\u201d<\/p>\n

      \"Anker
      The full CMYKWG print kit can cost $300. \u00a9 Raymond Wong \/ Gizmodo<\/figcaption><\/figure>\n

      And then there\u2019s extra ink to consider. The full CMYKWG kit costs $300. A single cartridge of white UV ink demands an extra $43. If you want many extra capsules of white and gray ink, necessary for creating a 3D effect on these prints, you\u2019ll likely end up spending hundreds of dollars more.<\/p>\n

      If you get the large package, prepare to spend a fair amount of time unboxing and setting everything up. Each ink cartridge inexplicably has its own packaging with foam inserts and a vacuum seal. By the time I had the EufyMake E1 situated, I ended up with a miniature mountain of waste. I felt like Philip J. Fry from Futurama<\/em>, unpacking and stamping together the two sides of an Oreo cookie just to end up licking the creamy center and tossing the rest.<\/p>\n

      The UV printer also creates a strong, cloying smell when it\u2019s in the middle of printing. The exhaust from the EufyMake E1 got so bad in our office we had to crack a window. During a marathon, multi-hour printing session, your room may fill with a smell of burning plastic crossed with cooked fish\u2014that is to say, unpleasant.<\/p>\n

      As a final note, you\u2019ll need extra space on your table or desk for this absolute hunk of a printer. It\u2019s close to 23 inches wide and weighs in at nearly 44 pounds. You\u2019ll always want a stable place for it to print on. The mechanisms driving the inkjet and moving flatbed may shake the foundations of your favorite end table if you\u2019re not careful.<\/p>\n

      Everything about the EufyMake E1 takes time<\/h2>\n
      \"Anker
      The rotary attachment will let you print on mugs, cups, and bottles. It will even work on tapered objects. \u00a9 Raymond Wong \/ Gizmodo<\/figcaption><\/figure>\n

      After plugging it in, the rest of the setup depends on the EufyMake app. You need to connect it to the same Wi-Fi network as your phone app, but once that\u2019s done, I suggest you abandon the phone app for all future printing needs. The app offers fewer controls than the Mac or PC version of EufyMake Studio. The snapping features that make lining up images with their printing materials are far less refined on mobile.<\/p>\n

      The EufyMake E1 demands time. After booting it up, it will take several minutes to inject ink and finish a cleanup process. Every time you intend to print on anything but a mug, you need to take a \u201csnapshot\u201d of the printing surface, which is the only way you can ensure your photos are lined up correctly. Depending on whether you\u2019re using the smaller or larger printing bed, this can take between three and seven minutes. That\u2019s because the UV printer needs to measure both the depth and size of each item with a laser array and an 8-megapixel downward-facing \u201csnapshot camera.\u201d<\/p>\n

      If you thought the printer setup process was a long wait, printing will take even longer, depending on the size of the canvas or objects. A few coasters may take anywhere from 10 to 15 minutes. A larger fabric canvas measuring 12 x 16 inches can take upwards of 30 minutes to print.<\/p>\n

      \n
      \n
      \"Anker<\/div>
      \t\t\t\t\u00a9 Raymond Wong \/ Gizmodo \t\t\t\t<\/figcaption><\/figure>\n
      \n
      \"Anker<\/div>
      \t\t\t\t\u00a9 Raymond Wong \/ Gizmodo \t\t\t\t<\/figcaption><\/figure>\n<\/div>\n

      Using the snapshot it takes before a print, the EufyMake Studio software will try to determine the edge of where you can print. For example, if you\u2019re printing on a circular coaster, it will set the boundaries of the print to the circle of that coaster. These automatic boundaries can vary in accuracy. Using Anker\u2019s own coasters on the smaller flatbed, the UV printer underestimated the boundaries of each, leaving a small area of unmarked white on top of each coaster.<\/p>\n

      The snapshot of the bed is just that, a vague approximation of the location of each object you hope to print on. You\u2019re better off manually resizing and cropping photos so they barely overshoot the limits of each object. Even then, I found there were numerous times I underestimated the size of my print with an irregularly shaped canvas. The EufyMake E1 left an ugly white line along the canvas edge where I failed to eclipse the edge. A physical frame may hide such small blemishes. It\u2019s just one more annoyance that keeps the UV printer from being a one-and-done device.<\/p>\n

      Surprisingly, the easiest way to print was using the rotary attachment. The EufyMake E1 takes a few scant minutes to scan the object and create a grid-lined layout for you to print on. I could easily craft multiple Gizmodo-themed tumblers and water bottles for some members of the office. The \u201cGizmodo blue\u201d color of the big \u201cG\u201d in our logo was slightly off in our final print, according to Gizmodo\u2019s managing director, Myl\u00e8ne Poncet. Still, I never had an easier time creating merch than with this UV printer.<\/p>\n

      Some beautiful prints, despite a few oddities<\/h2>\n
      \"Anker
      This isn\u2019t half of what I printed with the Anker EufyMake E1 UV printer. \u00a9 Raymond Wong \/ Gizmodo<\/figcaption><\/figure>\n

      What will matter more than any usability issues is the final print quality. This is where the EufyMake E1 makes the best case for itself, despite oddities and inconsistencies. I set out to print as many images as I could, both artwork and photos. I begged my colleagues for their family and friends\u2019 photos, and I ended up printing way too many cats they took home as souvenirs.<\/p>\n

      The EufyMake E1 prints at a max resolution of 1,440 DPI, or dots per inch. That\u2019s relatively large for this size of printer. It means your artwork will come out fairly detailed. However, you\u2019re also limited to a total printing surface area of around 13 x 16.5 inches. Anker representatives told me the company was working on an even larger print bed. My dreams of customizing my PC desktop tower\u2019s side panels will have to wait.<\/p>\n

      The UV printer accepts only the Anker-made UV ink cartridges with the classic CMYKWG color profile. It allows for printing \u201cmillions of colors,\u201d though full color accuracy may be somewhat dubious, depending on what you print. Some images I created from my colleagues\u2019 camera rolls came out utterly striking. One smartphone photo, a picture taken from a skiing trip in the French alps, floored me for how vibrant the reds turned out on the canvas.<\/p>\n

      \n
      \n
      \"Anker<\/div>
      \t\t\t\t\u00a9 Raymond Wong \/ Gizmodo \t\t\t\t<\/figcaption><\/figure>\n
      \n
      \"Anker<\/div>
      \t\t\t\t\u00a9 Raymond Wong \/ Gizmodo \t\t\t\t<\/figcaption><\/figure>\n<\/div>\n

      There were many other moments the platform came down, and I was left slightly disappointed. I\u2019ve been on an amateur photography kick recently ever since I bought my over-expensive Ricoh GR IIIx. I printed several of my recent photos onto miniature canvas blocks and found the images would brighten white areas too much and muddy some of the darker patches.<\/p>\n

      Print quality will also heavily depend on the size of your pictures. You want to upload the largest, highest-quality photos you can to get the best results. However, the EufyMake E1 rejects file sizes of more than 25MB. Whatever file you upload needs to be in the Goldilocks zone of \u201cjust right\u201d to claim the best results. I tried printing one of my photos at a relatively small 1,920 x 1,280 resolution on a metal sheet. The grayish picture was of winter woods surrounded by fog. The printer created a strange sepia tone effect on top of my photo that was not there in the original image. You could see the individual pixels and streaks where the UV ink dried, as if the DPI were accentuating every pixel.<\/p>\n

      \"Anker
      The automatic object selection software may result in an ugly offset print. \u00a9 Raymond Wong \/ Gizmodo<\/figcaption><\/figure>\n

      That being said, the fact you can print on practically anything makes this UV printer incredibly versatile. One of my colleagues asked me to print an artistic rendition of his two cats, Danforth and Bolton. The result was surprisingly accurate compared to the original image, with clean lines and fine details. If you compare the art\u00a0to the final print, the details are represented very well. The major difference is the slightly darker tone throughout the piece, especially the reds.<\/p>\n

      I further tried printing some classic artwork on a few coasters to compare to their real-life counterparts. Diego Vel\u00e1zquez\u2019 \u201cLas Meninas\u201d came out with an overall darker tone than the image found on Wikimedia Commons. Philip IV\u2019s daughter, Margaret Theresa, has a far more tan dress than in the less-than-accurate scanned image (in real life, the dress should appear white). If you compare a scan of Hans Holbein\u2019s \u201cThe Ambassadors\u201d to the printed version, you lose a modicum of detail on a small scale, especially in darker areas of the piece.<\/p>\n

      \n
      \n
      \"Anker<\/div>
      \t\t\t\t\u00a9 Raymond Wong \/ Gizmodo \t\t\t\t<\/figcaption><\/figure>\n
      \n
      \"Anker<\/div>
      \t\t\t\t\u00a9 Raymond Wong \/ Gizmodo \t\t\t\t<\/figcaption><\/figure>\n<\/div>\n

      Although you can print on anything, your choice of underlying layer may dictate how your print comes out. I\u2019ve been working on a Nerdy Gurdy\u2014a homemade medieval instrument that requires users to glue it together and paint everything themselves. I wanted to add a print of some marginalia figures\u2014including snail-riding rabbits\u2014from real-life medieval manuscripts to the lid of the keybox. I told the EufyMake E1 I was printing on wood when it was technically latex paint on top of wood. The resulting image was far too vague and transparent. If you have any doubts, you may get better results if you leave the material choice as \u201cunknown\u201d before printing.<\/p>\n

      The cool, faux 3D effect demands a ton of ink<\/h2>\n
      \"Anker
      The 3D effect is simple to deploy. It will use up a heap of gray and white ink. \u00a9 Raymond Wong \/ Gizmodo<\/figcaption><\/figure>\n

      The EufyMake E1 goes a step further than just a regular printer. It can also create an embossed, 3D effect by layering ink multiple times. With enough ink, you can create an almost painterly effect, as if multiple layers of oil paint had dried on the surface. The printer can hit a maximum embossed height of 5mm. If you\u2019ve seen some of metal printmaker Displate\u2019s \u201cTextra\u201d designs, the EufyMake E1 offers a similar 3D effect.<\/p>\n

      Setting up a textured print takes very little time in the EufyMake Studio. You just hit a button, and the app\u2019s AI models will create contours and thicker areas based on the makeup of the image.<\/p>\n

      \"Anker
      The EufyMake Studio software is easy to use, even if its not completely foolproof. \u00a9 Raymond Wong \/ Gizmodo<\/figcaption><\/figure>\n

      We decided to print one of Gizmodo Senior Editor of Consumer Tech Raymond Wong\u2019s photos on one of Anker\u2019s wooden canvases. A flat print usually take 30 minutes. Adding the 3D effect increased the print time to 5.5 hours. The EufyMake E1 first overlays multiple layers of gray and white ink to create the embossed areas before adding additional colors. That meant 40% of the way through the print, we had to exchange new white and gray ink cartridges.<\/p>\n

      The final 3D effect was incredible, with a beautiful sheen helping designate areas in the background and foreground. Inexplicably, the UV printer added a column of purple over the image that wasn\u2019t apparent in the original photo. While it didn\u2019t ruin the overall tone of the piece, it\u2019s worth being aware that prints may have unwanted artifacts. Adding the 3D effect is extra costly, both in terms of time and money. If you print smaller, 3D art, you may be able to reduce the amount of ink you use. To save money, you may be better off printing these embossed effects on smaller surfaces, like a water bottle or mug.<\/p>\n

      A printer built for dedicated creators<\/h2>\n
      \"Anker
      The EufyMake E1 can get addicting if you love merch. \u00a9 Raymond Wong \/ Gizmodo<\/figcaption><\/figure>\n

      Inevitably, with a printer of this size that can jet ink on any surface, I was constantly fighting the impulse to print a motley of art pieces to adorn my office walls. What you have to remember is that living artists and many estates of deceased artists still deserve something for their efforts.<\/p>\n

      It\u2019s a sense of entitlement. The assumption that, because an artwork is online, you don\u2019t have to pay for its use. Consider how many artists sell prints of their work, which outside of commissions could be a major part of their meager revenue. If you decide to get a UV printer, nobody can stop you from printing all the art you\u2019ve always wished. It\u2019s an ethical gray area, but I would still edge toward paying for prints that are available to support creators. If you try to sell prints of unlicensed artwork, you\u2019re running afoul of more than morals.<\/p>\n

      If you\u2019re printing your own art for sale, the EufyMake E1 makes for a versatile and slightly finicky merchandise machine that can fit on your desk. At this price, this is one of those devices made for dedicated creators. Perhaps you and a few friends can cobble together the money necessary to share a UV printer and then suffer through a long queue as everybody tries to print their art.<\/p>\n

      The EufyMake E1 is a first of its kind. Like the 3D printer boom of yesteryear, we\u2019ll hopefully see more UV printers of this caliber. More products usually mean lower prices. One day, you may not have to pay nearly as much for what\u2019s\u2014for the moment\u2014one of the coolest printers ever made.<\/p>\n<\/div>\n<\/article>\n

      \n

      Years ago, long before I joined this outfit, Gizmodo cemented a policy against reviewing printers. The reasons why are obvious. There are so few printers that can claim any features that beat the competition. Not to mention the travesty of proprietary printer ink and software locks that make printing an expensive nightmare. So there\u2019s a reason to pay attention when I say I was utterly obsessed with Anker\u2019s EufyMake E1 UV printer and its ability to print on practically anything and everything.<\/p>\n

      Anker\u2019s new printer isn\u2019t like any other. It uses a special kind of ink that cures near-instantly with a blast of ultraviolet light. This means that it\u2019s not designed to drop ink on a good ol\u2019 8.5 x 11-inch loose leaf. It instead prints on practically everything else. It can stencil on canvas, wood, plastic, metal, ceramics, and more. It\u2019s not just flat objects, the UV printer can print on stuff like a cylindrical water bottle. Ironically, when we tried printing on paper, we got some of our worst results from the EufyMake E1.<\/p>\n

      \n
      \n
      \n
      3.5<\/span><\/div>\n<\/div>\n

      Anker EufyMake E1 UV Printer<\/p>\n

      The Anker EufyMake E1 fufills its promise of printing on whatever you want, even if it will take a long time to do any of it.<\/p>\n

      \n
      \n
      \n
      \n

      Pros<\/p>\n<\/div>\n

        \n
      • Offers beautiful print quality <\/li>\n
      • Can create a faux-3D embossed effect <\/li>\n
      • Prints on flat surfaces and mugs <\/li>\n
      • PC\/Mac software is easy to use <\/li>\n<\/ul>\n<\/div>\n
        \n
        \n

        Cons<\/p>\n<\/div>\n

          \n
        • Lining up prints can be finicky <\/li>\n
        • Setup and printing takes time <\/li>\n
        • Exorbitant price for extra components <\/li>\n<\/ul>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
          \n

          And still, there seems to be a holy mandate, perhaps one of Moses\u2019 apocryphal \u201c15 commandments,\u201d that says no printer shall be without annoyances. There are no on-device menus or buttons. EufyMake\u2019s Mac and PC-based Studio software is clean and usable, though automatic object detection can result in a possible missprint.<\/p>\n

          The UV printer demands time. It\u2019s not fast enough; you can crank out dozens of customized water bottles like some industrial Etsy maker. To make the most out of this machine, you have to first understand the UV printer\u2019s quirks, of which there are many. What I can say for certain is all the images I printed out for friends and colleagues turned out bright, vibrant, and beautiful\u2014or at least, most of them did.<\/p>\n

          \"Anker
          You can really print on anything, from wood, to canvas, to plastic. Just don\u2019t try regular paper. \u00a9 Raymond Wong \/ Gizmodo<\/figcaption><\/figure>\n

          Price will be your biggest hurdle. The EufyMake E1 was originally a Kickstarter project that ran through 2025. Anker claimed it had shipped out the initial units to all backers. Now, the base UV printer bundle is up for preorder for $2,300 with an expected launch date on May 6. The EufyMake E1 is made for small businesses who expect to become a small-scale DIY studio. Otherwise, you\u2019ll need deep pockets if you hope to become the absolute king of gift giving.<\/p>\n

          Costs an arm and a leg, even for extra ink<\/h2>\n
          \"Anker
          Setup involves unboxing each separate ink cartridge. \u00a9 Raymond Wong \/ Gizmodo<\/figcaption><\/figure>\n

          The $2,300 basic bundle comes with the necessary ink cartridges, the mini flatbed, and the larger standard flatbed to print on. If you want other accoutrements, like the rotary attachment to print on mugs and a UV DTF laminating machine, that\u2019s an additional $400 for each. For review, Anker generously provided Gizmodo with the entire lineup of accessories and many, many objects to print on. That includes the $2,900 \u201cDeluxe\u201d bundle with all the extra attachments.<\/p>\n

          In addition, Anker\u2019s EufyMake brand will try to upsell you bundle after bundle of blank ceramic coasters, mugs, metal sheets, canvases, and many other objects to print on. You don\u2019t have to get everything you want from Anker itself. I went out to my local art supplies store and bought a few dozen flat canvas hardboards for less than $10, and they accepted these prints just as nicely as Anker\u2019s $300 \u201cBasic Bundle Materials Kit.\u201d<\/p>\n

          \"Anker
          The full CMYKWG print kit can cost $300. \u00a9 Raymond Wong \/ Gizmodo<\/figcaption><\/figure>\n

          And then there\u2019s extra ink to consider. The full CMYKWG kit costs $300. A single cartridge of white UV ink demands an extra $43. If you want many extra capsules of white and gray ink, necessary for creating a 3D effect on these prints, you\u2019ll likely end up spending hundreds of dollars more.<\/p>\n

          If you get the large package, prepare to spend a fair amount of time unboxing and setting everything up. Each ink cartridge inexplicably has its own packaging with foam inserts and a vacuum seal. By the time I had the EufyMake E1 situated, I ended up with a miniature mountain of waste. I felt like Philip J. Fry from Futurama<\/em>, unpacking and stamping together the two sides of an Oreo cookie just to end up licking the creamy center and tossing the rest.<\/p>\n

          The UV printer also creates a strong, cloying smell when it\u2019s in the middle of printing. The exhaust from the EufyMake E1 got so bad in our office we had to crack a window. During a marathon, multi-hour printing session, your room may fill with a smell of burning plastic crossed with cooked fish\u2014that is to say, unpleasant.<\/p>\n

          As a final note, you\u2019ll need extra space on your table or desk for this absolute hunk of a printer. It\u2019s close to 23 inches wide and weighs in at nearly 44 pounds. You\u2019ll always want a stable place for it to print on. The mechanisms driving the inkjet and moving flatbed may shake the foundations of your favorite end table if you\u2019re not careful.<\/p>\n

          Everything about the EufyMake E1 takes time<\/h2>\n
          \"Anker
          The rotary attachment will let you print on mugs, cups, and bottles. It will even work on tapered objects. \u00a9 Raymond Wong \/ Gizmodo<\/figcaption><\/figure>\n

          After plugging it in, the rest of the setup depends on the EufyMake app. You need to connect it to the same Wi-Fi network as your phone app, but once that\u2019s done, I suggest you abandon the phone app for all future printing needs. The app offers fewer controls than the Mac or PC version of EufyMake Studio. The snapping features that make lining up images with their printing materials are far less refined on mobile.<\/p>\n

          The EufyMake E1 demands time. After booting it up, it will take several minutes to inject ink and finish a cleanup process. Every time you intend to print on anything but a mug, you need to take a \u201csnapshot\u201d of the printing surface, which is the only way you can ensure your photos are lined up correctly. Depending on whether you\u2019re using the smaller or larger printing bed, this can take between three and seven minutes. That\u2019s because the UV printer needs to measure both the depth and size of each item with a laser array and an 8-megapixel downward-facing \u201csnapshot camera.\u201d<\/p>\n

          If you thought the printer setup process was a long wait, printing will take even longer, depending on the size of the canvas or objects. A few coasters may take anywhere from 10 to 15 minutes. A larger fabric canvas measuring 12 x 16 inches can take upwards of 30 minutes to print.<\/p>\n

          \n
          \n
          \"Anker<\/div>
          \t\t\t\t\u00a9 Raymond Wong \/ Gizmodo \t\t\t\t<\/figcaption><\/figure>\n
          \n
          \"Anker<\/div>
          \t\t\t\t\u00a9 Raymond Wong \/ Gizmodo \t\t\t\t<\/figcaption><\/figure>\n<\/div>\n

          Using the snapshot it takes before a print, the EufyMake Studio software will try to determine the edge of where you can print. For example, if you\u2019re printing on a circular coaster, it will set the boundaries of the print to the circle of that coaster. These automatic boundaries can vary in accuracy. Using Anker\u2019s own coasters on the smaller flatbed, the UV printer underestimated the boundaries of each, leaving a small area of unmarked white on top of each coaster.<\/p>\n

          The snapshot of the bed is just that, a vague approximation of the location of each object you hope to print on. You\u2019re better off manually resizing and cropping photos so they barely overshoot the limits of each object. Even then, I found there were numerous times I underestimated the size of my print with an irregularly shaped canvas. The EufyMake E1 left an ugly white line along the canvas edge where I failed to eclipse the edge. A physical frame may hide such small blemishes. It\u2019s just one more annoyance that keeps the UV printer from being a one-and-done device.<\/p>\n

          Surprisingly, the easiest way to print was using the rotary attachment. The EufyMake E1 takes a few scant minutes to scan the object and create a grid-lined layout for you to print on. I could easily craft multiple Gizmodo-themed tumblers and water bottles for some members of the office. The \u201cGizmodo blue\u201d color of the big \u201cG\u201d in our logo was slightly off in our final print, according to Gizmodo\u2019s managing director, Myl\u00e8ne Poncet. Still, I never had an easier time creating merch than with this UV printer.<\/p>\n

          Some beautiful prints, despite a few oddities<\/h2>\n
          \"Anker
          This isn\u2019t half of what I printed with the Anker EufyMake E1 UV printer. \u00a9 Raymond Wong \/ Gizmodo<\/figcaption><\/figure>\n

          What will matter more than any usability issues is the final print quality. This is where the EufyMake E1 makes the best case for itself, despite oddities and inconsistencies. I set out to print as many images as I could, both artwork and photos. I begged my colleagues for their family and friends\u2019 photos, and I ended up printing way too many cats they took home as souvenirs.<\/p>\n

          The EufyMake E1 prints at a max resolution of 1,440 DPI, or dots per inch. That\u2019s relatively large for this size of printer. It means your artwork will come out fairly detailed. However, you\u2019re also limited to a total printing surface area of around 13 x 16.5 inches. Anker representatives told me the company was working on an even larger print bed. My dreams of customizing my PC desktop tower\u2019s side panels will have to wait.<\/p>\n

          The UV printer accepts only the Anker-made UV ink cartridges with the classic CMYKWG color profile. It allows for printing \u201cmillions of colors,\u201d though full color accuracy may be somewhat dubious, depending on what you print. Some images I created from my colleagues\u2019 camera rolls came out utterly striking. One smartphone photo, a picture taken from a skiing trip in the French alps, floored me for how vibrant the reds turned out on the canvas.<\/p>\n

          \n
          \n
          \"Anker<\/div>
          \t\t\t\t\u00a9 Raymond Wong \/ Gizmodo \t\t\t\t<\/figcaption><\/figure>\n
          \n
          \"Anker<\/div>
          \t\t\t\t\u00a9 Raymond Wong \/ Gizmodo \t\t\t\t<\/figcaption><\/figure>\n<\/div>\n

          There were many other moments the platform came down, and I was left slightly disappointed. I\u2019ve been on an amateur photography kick recently ever since I bought my over-expensive Ricoh GR IIIx. I printed several of my recent photos onto miniature canvas blocks and found the images would brighten white areas too much and muddy some of the darker patches.<\/p>\n

          Print quality will also heavily depend on the size of your pictures. You want to upload the largest, highest-quality photos you can to get the best results. However, the EufyMake E1 rejects file sizes of more than 25MB. Whatever file you upload needs to be in the Goldilocks zone of \u201cjust right\u201d to claim the best results. I tried printing one of my photos at a relatively small 1,920 x 1,280 resolution on a metal sheet. The grayish picture was of winter woods surrounded by fog. The printer created a strange sepia tone effect on top of my photo that was not there in the original image. You could see the individual pixels and streaks where the UV ink dried, as if the DPI were accentuating every pixel.<\/p>\n

          \"Anker
          The automatic object selection software may result in an ugly offset print. \u00a9 Raymond Wong \/ Gizmodo<\/figcaption><\/figure>\n

          That being said, the fact you can print on practically anything makes this UV printer incredibly versatile. One of my colleagues asked me to print an artistic rendition of his two cats, Danforth and Bolton. The result was surprisingly accurate compared to the original image, with clean lines and fine details. If you compare the art\u00a0to the final print, the details are represented very well. The major difference is the slightly darker tone throughout the piece, especially the reds.<\/p>\n

          I further tried printing some classic artwork on a few coasters to compare to their real-life counterparts. Diego Vel\u00e1zquez\u2019 \u201cLas Meninas\u201d came out with an overall darker tone than the image found on Wikimedia Commons. Philip IV\u2019s daughter, Margaret Theresa, has a far more tan dress than in the less-than-accurate scanned image (in real life, the dress should appear white). If you compare a scan of Hans Holbein\u2019s \u201cThe Ambassadors\u201d to the printed version, you lose a modicum of detail on a small scale, especially in darker areas of the piece.<\/p>\n

          \n
          \n
          \"Anker<\/div>
          \t\t\t\t\u00a9 Raymond Wong \/ Gizmodo \t\t\t\t<\/figcaption><\/figure>\n
          \n
          \"Anker<\/div>
          \t\t\t\t\u00a9 Raymond Wong \/ Gizmodo \t\t\t\t<\/figcaption><\/figure>\n<\/div>\n

          Although you can print on anything, your choice of underlying layer may dictate how your print comes out. I\u2019ve been working on a Nerdy Gurdy\u2014a homemade medieval instrument that requires users to glue it together and paint everything themselves. I wanted to add a print of some marginalia figures\u2014including snail-riding rabbits\u2014from real-life medieval manuscripts to the lid of the keybox. I told the EufyMake E1 I was printing on wood when it was technically latex paint on top of wood. The resulting image was far too vague and transparent. If you have any doubts, you may get better results if you leave the material choice as \u201cunknown\u201d before printing.<\/p>\n

          The cool, faux 3D effect demands a ton of ink<\/h2>\n
          \"Anker
          The 3D effect is simple to deploy. It will use up a heap of gray and white ink. \u00a9 Raymond Wong \/ Gizmodo<\/figcaption><\/figure>\n

          The EufyMake E1 goes a step further than just a regular printer. It can also create an embossed, 3D effect by layering ink multiple times. With enough ink, you can create an almost painterly effect, as if multiple layers of oil paint had dried on the surface. The printer can hit a maximum embossed height of 5mm. If you\u2019ve seen some of metal printmaker Displate\u2019s \u201cTextra\u201d designs, the EufyMake E1 offers a similar 3D effect.<\/p>\n

          Setting up a textured print takes very little time in the EufyMake Studio. You just hit a button, and the app\u2019s AI models will create contours and thicker areas based on the makeup of the image.<\/p>\n

          \"Anker
          The EufyMake Studio software is easy to use, even if its not completely foolproof. \u00a9 Raymond Wong \/ Gizmodo<\/figcaption><\/figure>\n

          We decided to print one of Gizmodo Senior Editor of Consumer Tech Raymond Wong\u2019s photos on one of Anker\u2019s wooden canvases. A flat print usually take 30 minutes. Adding the 3D effect increased the print time to 5.5 hours. The EufyMake E1 first overlays multiple layers of gray and white ink to create the embossed areas before adding additional colors. That meant 40% of the way through the print, we had to exchange new white and gray ink cartridges.<\/p>\n

          The final 3D effect was incredible, with a beautiful sheen helping designate areas in the background and foreground. Inexplicably, the UV printer added a column of purple over the image that wasn\u2019t apparent in the original photo. While it didn\u2019t ruin the overall tone of the piece, it\u2019s worth being aware that prints may have unwanted artifacts. Adding the 3D effect is extra costly, both in terms of time and money. If you print smaller, 3D art, you may be able to reduce the amount of ink you use. To save money, you may be better off printing these embossed effects on smaller surfaces, like a water bottle or mug.<\/p>\n

          A printer built for dedicated creators<\/h2>\n
          \"Anker
          The EufyMake E1 can get addicting if you love merch. \u00a9 Raymond Wong \/ Gizmodo<\/figcaption><\/figure>\n

          Inevitably, with a printer of this size that can jet ink on any surface, I was constantly fighting the impulse to print a motley of art pieces to adorn my office walls. What you have to remember is that living artists and many estates of deceased artists still deserve something for their efforts.<\/p>\n

          It\u2019s a sense of entitlement. The assumption that, because an artwork is online, you don\u2019t have to pay for its use. Consider how many artists sell prints of their work, which outside of commissions could be a major part of their meager revenue. If you decide to get a UV printer, nobody can stop you from printing all the art you\u2019ve always wished. It\u2019s an ethical gray area, but I would still edge toward paying for prints that are available to support creators. If you try to sell prints of unlicensed artwork, you\u2019re running afoul of more than morals.<\/p>\n

          If you\u2019re printing your own art for sale, the EufyMake E1 makes for a versatile and slightly finicky merchandise machine that can fit on your desk. At this price, this is one of those devices made for dedicated creators. Perhaps you and a few friends can cobble together the money necessary to share a UV printer and then suffer through a long queue as everybody tries to print their art.<\/p>\n

          The EufyMake E1 is a first of its kind. Like the 3D printer boom of yesteryear, we\u2019ll hopefully see more UV printers of this caliber. More products usually mean lower prices. One day, you may not have to pay nearly as much for what\u2019s\u2014for the moment\u2014one of the coolest printers ever made.<\/p>\n<\/div>\n

          [analyse_source url=”https:\/\/gizmodo.com\/ankers-eufymake-e1-finally-brings-printers-out-of-the-dark-ages-2000745088″]<\/p>\n","protected":false},"excerpt":{"rendered":"

          [analyse_image type=”featured” src=”https:\/\/gizmodo.com\/app\/uploads\/2026\/04\/Anker-eufyMake-E1-UV-Printer-review-26-1200×675.jpg”] Years ago, long before I joined this outfit, Gizmodo cemented a policy against reviewing printers. The reasons why are obvious. There are so few printers that can claim any features that beat the competition. Not to mention the travesty of proprietary printer ink and software locks that make printing an expensive nightmare. […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[2],"tags":[226,53],"class_list":["post-1878827","post","type-post","status-publish","format-standard","hentry","category-politics","tag-crawlmanager","tag-gizmodo-com"],"_links":{"self":[{"href":"https:\/\/analyse.optim.biz\/index.php?rest_route=\/wp\/v2\/posts\/1878827","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/analyse.optim.biz\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/analyse.optim.biz\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/analyse.optim.biz\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/analyse.optim.biz\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=1878827"}],"version-history":[{"count":0,"href":"https:\/\/analyse.optim.biz\/index.php?rest_route=\/wp\/v2\/posts\/1878827\/revisions"}],"wp:attachment":[{"href":"https:\/\/analyse.optim.biz\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=1878827"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/analyse.optim.biz\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=1878827"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/analyse.optim.biz\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=1878827"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}